BODY (UPPERSTRUCTURE) / Pump Device 8. Connect hoses (5) (2 used) to main pump (6). : 19 mm 5 6 : 29.5 N m (3 kgf m, 21.5 lbf ft) : 22 mm Control Valve : 39 N m (4 kgf m, 28.5 lbf ft) 9. Install suction filter (3) to hydraulic oil tank (4). Add hydraulic oil to hydraulic oil tank (4). Install cover (2) to hydraulic oil tank (4) with sems bolts (1) (6 used). Add hydraulic oil to hydraulic oil tank (4). Loosen the breather valve with the regulator attached and bleed air from hydraulic oil tank (4). W4GB-02-04-012 1 2 3 : 14 mm 4 : 15 N m (1.5 kgf m, 11 lbf ft) 10. Install the cab with the floor plate attached. (Refer to REMOVAL AND INSTALLATION OF CAB in W2-1.) W4GB-02-03-010 W2-6-6