hitachi — Assembly of Priority Valve

BODY (UPPERSTRUCTURE) / Pump Device Assembly of Priority Valve 5. Install orifice (3) [blue-white] and orifice (7) [red] to spool (1). CAUTION: The priority valve is especially sensitive to dirt. When disassembling and assembling, prevent dirt from entering. 1. Install plug (9) to casing (16). : 3 N m (0.3 kgf m, 2.2 lbf ft) 6. Insert spool (1) into casing (16). At this time, check the direction of spool (1). 7. Install orifice (3) [blue-white] to plug (4). : 3 mm : 6 mm : 15 N m (1.5 kgf m, 11 lbf ft) 2. Install seat (10) to casing (16). : 7 mm : 3 mm : 15 N m (1.5 kgf m, 11 lbf ft) 3. Install spring (12) and poppet (8) to screw (13).

Install the screw (13) assembly to casing (16) so that the end of poppet (8) can be inserted into the hole on seat (10) 4. Install gasket (15) and nut (11) to screw (13). : 3 N m (0.3 kgf m, 2.2 lbf ft) 8. Install O-ring (6) and spring (5) to plug (4). Install the plug (4) assembly to casing (16). : 50 mm : 550 N m (56 kgf m, 410 lbf ft) 9. Install plug (2) to casing (16). : 41 mm : 22 mm : 46 N m (4.7 kgf m, 34 lbf ft) : 450 N m (46 kgf m, 330 lbf ft) NOTE: After measuring and adjusting the steering relief pressure, install nut cap (14). 10. Install gasket (15) and nut cap (14) to screw (13). : 22 mm : 37 N m (3.7 kgf m, 27 lbf ft) W2-6-29