BODY (UPPERSTRUCTURE) / Control Valve Disassembly of Control Valve 1. Remove plug (10) from housing (31). 7. Slowly turn and remove spools (33, 36) from housing (31). 8. Secure spools (33, 36) in a vise by using wooden pieces as illustrated. : 17 mm 2. Remove plug (13) from housing (31). Remove poppet (15) and spring (14) from housing (31). Remove O-ring (4) from plug (13). : 36 mm IMPORTANT: Attach a spanner onto the hexagonal part of the relief valve case. 3. Remove relief valve (29) from housing (31). : 32 mm 4. Remove socket bolts (11) (6 used) from pilot housings (38) (2 used) and pilot housing (25). Remove pilot housing (25) and pilot housings (38) (2 used) from housing (31).
W4GB-02-05-002 9. Remove bolt (26), spring seats (20) (2 used) and spring (27) from spool (36). : 8 mm 5. Remove socket bolts (23) (2 used) from pilot housing (24). Remove pilot housing (24) from pilot housing (28). : 19 mm 10. Remove bolt (22), spring seats (20) (2 used) and spring (21) from spool (33). : 19 mm 11. Remove plug (37) from spool (33). Remove O-ring (32) from plug (37). : 8 mm 6. Remove O-rings (12) (4 used) from pilot housings (24, 25) and pilot housings (38) (2 used). : 8 mm 12. Remove socket bolts (11) (3 used) from pilot housing (28). Remove pilot housing (28) from housing (31). : 8 mm W2-7-7