BODY (UPPERSTRUCTURE) / Control Valve Assembly of Control Valve 1. Install O-rings (39, 40) to end plate (41). 2. Install end plate (41) to housing (31) with socket bolts (42) (4 used). 7. Install poppet (43) and spring (44) to end plate (41). Install plug (45) to end plate (41). : 177 to 206 N m (18 to 21 kgf m, 131 to 152 lbf ft) 8. Install poppet (16) and spring (17) to housing (31). 9. Install O-rings (18, 12) and backup ring (19) to pilot housing (28). Install pilot housing (28) to housing (31) with socket bolts (11) (3 used). : 12 mm : 10 mm : 88 to 93 N m (9 to 9.5 kgf m, 65 to 69 lbf ft) 3. Install plugs (30) (2 used) and plug (6) to housing (31). :
118 to 138 N m (12 to 14 kgf m, 87 to 102 lbf ft) 4. Install poppet (2) and spring (3) to housing (31). Install O-ring (4) to plug (5). Install plug (5) to housing (31). : 10 mm : 49 to 54 N m (5 to 5.4 kgf m, 36 to 40 lbf ft) 10. Secure spool (33) in a vise by using wooden pieces as illustrated. Install O-ring (32) to plug (37). Install O-ring (32) to the edge of the chamfered sides of spool (33). : 8 mm : 275 to 304 N m (28 to 31 kgf m, 200 to 225 lbf ft) 5. Install poppets (9, 8) and spring (3) to housing (31). Install O-ring (4) to plug (7). Install plug (7) to housing (31). : 36 mm : 8 mm : 25 to 30 N m (2.5 to 3 kgf m, 18.5 to 22 lbf ft) : 36 mm :
275 to 304 N m (28 to 31 kgf m, 200 to 225 lbf ft) 6. Install main relief valve (1) to housing (31). : 27 mm : 177 to 206 N m (18 to 21 kgf m, 131 to 152 lbf ft) W4GB-02-05-002 11. Install O-ring (32) to bolt (22). Install spring seat (20), spring (21) and spring seat (20) through bolt (22) in this order. Install the bolt (22) assembly to spool (33). : 19 mm : 25 to 30 N m (2.5 to 3 kgf m, 18.5 to 22 lbf ft) W2-7-13