hitachi — Removal and Installation of Pilot Valve

BODY (UPPERSTRUCTURE) / Pilot Valve Installation 1. Align the matching marks and insert pilot valve (9) into bracket (11). 2. Install pilot valve (9) to bracket (11) with bolts (10) (2 used). 9 10 : 8 mm : 50 N m (5 kgf m, 37 lbf ft) 3. Connect hoses (12) (6 used) to pilot valve (9). 11 : 19 mm : 29.5 N m (3 kgf m, 21.5 lbf ft) : 39 N m (4 kgf m, 28.5 lbf ft) 4. Install upper cover (4) to bracket (8) with screws (3) (4 used). 5. Connect the connector to pilot valve (9) and upper cover (4). 6. Install grips (1) (2 used) of the control lever. (In case of the multi-function lever, install the lever and the boot.) 7. Install covers (6, 7) to bracket (8) with screws (5) (6 used). IMPORTANT:

After completing the work, check the hydraulic oil level. Start the engine. Push control lever lock (2) forward and set in the Unlock state. Check for any oil leakage at each connection. : 22 mm W4GB-02-06-002 12 3 4 5 6 7 W4GB-02-06-001 Unlock 1 M4GB-01-050 W2-8-3 8 2