BODY (UPPERSTRUCTURE) / Pilot Valve 26. Remove O-rings (13) (4 used) from covers (9) (2 used). [A port without a detent] 27. Remove push rod (18) from detent bushing (15). NOTE: Record the combination of detent bushing (15) and push rod (18). [A port with a detent] 28. Hold detent rings (10) (3 used) and compress springs (11) (3 used). Remove steel balls (16) (12 used). NOTE: Prevent steel ball (16) from falling off. 29. Remove push rods (12) (3 used) from detent bushing (15). NOTE: Record the combination of detent bushing (15) and push rod (12). 30. Remove detent rings (10) (3 used) and springs (11) (3 used) from detent bushings (15) (3 used). 31.
Remove scrapers (17) (4 used) from detent bushings (15) (4 used). NOTE: When removing scraper (17), do not damage the inner surface of detent bushing (15). W2-8-11