BODY (UPPERSTRUCTURE) / Fan Pump and Motor REMOVAL AND INSTALLATION OF FAN PUMP CAUTION: Bleed air from the hydraulic oil tank before doing any work. (Refer to BLEED AIR FROM HYDRAULIC OIL TANK on W1-4-1.) Removal 1. Disconnect hose (7) at the inlet side from fan pump (3). Remove O-ring (8). 3 1, 2 : 41 mm 2. Disconnect hose (1) at the delivery side from fan pump (3). Remove O-ring (2). : 36 mm 3. Remove bolts (4) (2 used) and spring washers (5) (2 used) from fan pump (3). Remove fan pump (3) and gasket (6) from engine (9). W4GD-02-10-001 7, 8 : 14 mm W4GD-02-10-002 6 3 W2-10-1 4 5 9