hitachi — Removal and Installation of Fan Motor

BODY (UPPERSTRUCTURE) / Fan Pump and Motor REMOVAL AND INSTALLATION OF FAN MOTOR CAUTION: Bleed air from the hydraulic oil tank before doing any work. (Refer to BLEED AIR FROM HYDRAULIC OIL TANK on W1-4-1.) Removal 1. Open rear grill (1). Remove cooling fan (2) outward. 2. Remove bolts (3) (8 used) and washers (4) (8 used) from guard (5). Remove guard (5) from cover (6). W4GB-02-08-300 : 14 mm 3. Remove bolt (10), spring washer (11) and washer (12) from retainer (13). Remove the fan (14) assembly from fan motor (17) by using a puller. 3 W4GB-02-08-301 : 14 mm 4. Remove bolts (28) (4 used) and washers (27) (4 used) from bracket (25). Remove cover (26) from bracket (25). :

14 mm W4GD-02-10-004 W2-10-3 1 2 5 6 4 10 12 14 11 13 1 25 28 27 26 13 1 25 28 27 26