BODY (TRAVEL SYSTEM) / Drive Unit REMOVAL AND INSTALLATION OF DRIVE UNIT Removal 1. Remove the cab. (Refer to W2-1.) 2. Remove the hood. (Refer to W2-4.) 3. Remove the hydraulic oil tank. (Refer to W2-5.) 4. Disconnect the hose from the main pump. (Refer to W2-6.) 5. Remove the propeller shaft. (Refer to W3-4.) 6. Remove drain plug (12) from drive unit (9). Drain transmission oil. NOTE: Provide a 50 L (13.2 US gal.) container in order to collect oil, and process waste oil appropriately. 7. Remove bolts (3) (4 used) from split flanges (1) (2 used). Remove split flanges (1) (2 used) and washers (2) (8 used) from drive unit (9). Disconnect hose (4) from drive unit (9). Cap the open ends. :
17 mm W4GC-03-02-181 5 3 4 : 14 mm 8. Disconnect hoses (5, 10 and 11) from drive unit (9). Cap the open ends. 2 1 9 W4GD-03-02-001 9 : 27 mm W4GD-03-02-026 11 10 W3-2-1 12 9