hitachi — Disassembly of Drive Unit

BODY (TRAVEL SYSTEM) / Drive Unit 36. Remove bolts (112) (3 used) from retainer plate (98) at the transmission case (50) side. Remove flange (95), retainer plate (98), O-ring (96) and shims (111) (7 used) from output shaft (99). CAUTION: The forward clutch (68) assembly and the reverse clutch (116) assembly: weight: 35 kg (80 lb) for each 33. Install an eyebolt (M10, Pitch 1.25 mm) to the shaft of forward clutch (68) and reverse clutch (116). Attach a nylon sling onto the eyebolt. Remove forward clutch (68) and reverse clutch (116) from transmission case (50). : 19 mm 37. Remove bolts (52) (4 used) and washers (135) (4 used) from seal retainer (53).

Remove seal retainer (53) from transmission case (50). : 17 mm 38. Remove spacer (97) from output shaft (99). 39. Remove the outer races of bearings (141, 142 and 143) from torque converter housing (25). CAUTION: The 1-speed/2-speed clutch (113) assembly and the 3-speed/4-speed clutch (117) assembly: weight: 55 kg (125 lb) for each 34. Remove 1-speed/2-speed clutch (113) and 3-speed/4-speed clutch (117) from transmission case (50) in the same way. 117 113 50 116 68 W4GC-03-02-131 35. Remove reverse gear (122) and spacer (123) where shaft (124) was removed from transmission case (50). W3-2-29