hitachi — Disassembly of Drive Unit

BODY (TRAVEL SYSTEM) / Drive Unit Removal of Parking Brake 40. Secure transmission case (50) on a workbench with the open part facing downward. Remove socket bolts (18) (4 used) and washers (19) (4 used) from cap (85). Remove the piston housing (84) assembly from brake housing (94). 45. Remove brake housing (94) from rear case (54) by using a pry bar. Remove O-ring (80) from brake housing (94). : 8 mm 41. Remove O-ring (83) from brake housing (94). 42. Remove retaining ring (86) from low gear (78). 43. Remove disc hub (89) from low gear (78). Remove end plate (90), plates (81) (7 used) and discs (82) (6 used) from brake housing (94). 44. Remove socket bolts (2 used) from brake housing (94).

CAUTION: As the strong spring is built in, loosen bolt (17) until the spring force disappears. 46. Secure the piston housing (84) assembly on a workbench. Remove bolts (17) (2 used) from cap (85). Remove cap (85) from piston housing (84). : 14 mm 47. Remove springs (87) (24 used) from piston (88). IMPORTANT: Put the matching marks onto piston (88) and piston housing (84). 48. Remove O-ring (93) from piston housing (84). 49. Remove piston (88) from piston housing (84) by using a plastic hammer. 50. Remove D-rings (91, 92) from piston (88). : 8 mm Socket Bolt 94 W4GC-03-02-042 54 W3-2-31