hitachi — Disassembly of Drive Unit

BODY (TRAVEL SYSTEM) / Drive Unit Removal of Rear Case 51. Remove bolts (112) (3 used) from flange (95) at the rear case (54) side. Remove flange (95), retainer plate (98) and O-ring (96) from output shaft (99). Removal of Gear and Shaft 54. Remove bolts (2 used) and washers (2 used) from oil baffle (104). Remove oil baffle (104) from transmission case (50). : 19 mm 52. Remove bolts (12) (2 used) and washers (13) (2 used) from seal retainer (14). Remove seal retainer (14) from rear case (54) by using the pulling-out bolts (M12, Pitch 1.75 mm) (3 used). : 17 mm : 17 mm CAUTION: Ring case (54) weight: 50 kg (115 lb) IMPORTANT:

When output shaft (99) is pulled together with rear case (54), oil baffle (104) may be damaged. 53. Attach a wire rope onto rear case (54). Hold rear case (54). Remove bolts (15) (29 used) and washers (16) (14 used) from rear case (54). Remove rear case (54) from transmission case (50) by using the pulling-out bolt (M12, Pitch 1.75 mm). 50 104 W4GC-03-02-051 55. Remove low gear (78) from transmission case (50). 56. Remove spacer (103) from output shaft (99). 57. Remove gears (105, 106) from output shaft (99). 58. Remove high gear (118) from transmission case (50). : 17 mm W3-2-33 Bolt, Washer