hitachi — Disassembly of Drive Unit

BODY (TRAVEL SYSTEM) / Drive Unit 59. Remove output shaft (99) from transmission case (50). Remove bearing (102) and spacer (103) from output shaft (99). 60. Remove bolts (70) (3 used) and washers (71) (3 used) from idler cap (72). Remove idler cap (72) and shim (73) from transmission case (50). 63. Remove sleeves (2 used) from transmission case (50). Sleeve, O-Ring : 17 mm Removal of Forward and Reverse Distributor Caps 61. Remove bolts (20) (4 used) and washers (21) (4 used) from forward distributor cap (23). Remove distributor cap (23) from transmission case (50) by using the pulling-out bolts (M12, Pitch 1.75 mm) (2 used), a plastic hammer and a pry bar. : 17 mm W4GC-03-02-058 64.

Remove O-rings (2 used) from the sleeves (2 used). 65. Remove reverse distributor cap (8) in the same way. CAUTION: Do not damage shim (69). 62. Remove shims (69) (8 used) from transmission case (50). W3-2-35