BODY (TRAVEL SYSTEM) / Drive Unit Disassembly of Torque Converter Wheel Removal of Turbine Shaft 1. Place the torque converter vertically with input plate (5) facing upward. Secure the torque converter on a workbench. 2. Remove socket bolts (3) (15 used) from input guide (2). Remove input guide (2) from cover wheel (6). Disassembly of Cover Wheel 7. Turn over the torque converter. Remove bolts (13) (24 used), spring washers (12) (24 used) and washers (11) (24 used) from impeller wheel (10). Remove the stator holder (17) assembly from cover wheel (6). : 14 mm 8. Remove turbine wheel (7) and bearing (4) from cover wheel (6). 9. Remove oil seal ring (29) from turbine wheel (7).
Disassembly of Stator Holder 10. Remove retaining ring (28) from stator holder (17). 11. Remove stator holder (17) from stator hub (27). 12. Remove oil seal ring (25) from stator holder (17). 13. Remove stator wheel (9) from impeller wheel (10). 14. Remove retaining rings (8) (2 used) and stator hub (27) from stator wheel (9). : 10 mm 3. Remove input plate (5) from cover wheel (6). 4. Remove retaining ring (34), spacers (31, 33) and O-ring (32) from turbine shaft (18). 5. Remove the turbine shaft (18) assembly from stator holder (17). 6. Remove oil seal ring (22), retaining ring (21), washer (20) and bearing (19) from turbine shaft (18). W3-2-37