hitachi — Assembly of Torque Converter Wheel

BODY (TRAVEL SYSTEM) / Drive Unit Assembly of Torque Converter Wheel Assembly of Stator Holder 1. Install bearing (26) to impeller hub (14). 2. Install pump drive gear (15) and impeller hub (14) to impeller wheel (10) with socket bolts (16) (8 used). Assembly of Cover Wheel 8. Install oil seal ring (29) to turbine wheel (7). Install bearing (4) to cover wheel (6). 9. Install turbine wheel (7) to cover wheel (6). Assembly of Turbine Shaft 10. Install cover wheel (6) to impeller wheel (10) with bolts (13) (24 used), spring washers (12) (24 used) and washers (11) (24 used). : 8 mm : 51.1 to 58.3 N m (5.21 to 5.95 kgf m, 38 to 43 lbf ft) 3.

Install stator hub (27) to stator wheel (9) with retaining rings (8) (2 used). 4. Install oil seal ring (25) to stator holder (17). 5. Install stator holder (17) to impeller wheel (10). IMPORTANT: Align the matching marks on the lubrication oil passages of stator hub (27) and stator holder (17). 6. Install stator hub (27) to stator holder (17). 7. Install stator hub (27) to stator holder (17) with retaining ring (28). : 39 to 45 N m (4.0 to 4.6 kgf m, 28.5 to 33 lbf ft) 11. Install bearing (19), washer (20), retaining ring (21) and oil seal ring (22) to turbine shaft (18). 12. Install turbine shaft (18) to stator holder (17). 13.

Install spacers (31, 33), O-ring (32) and retaining ring (34) to turbine shaft (18). 14. Install input plate (5) and input guide (2) to cover wheel (6) with socket bolts (3) (15 used). : 14 mm : 10 mm : 97 to 111 N m (9.9 to 11.5 kgf m, 72 to 82 lbf ft) W3-2-41