BODY (TRAVEL SYSTEM) / Drive Unit Disassembly of Control Valve 1. Remove socket bolts (24) (12 used) from solenoid valves (2) (6 used). Remove solenoid valves (2) (6 used) from solenoid valve body (7). 7. Turn over valve body (10). Remove socket bolts (6) (14 used) from solenoid valve body (7). Remove solenoid valve body (7) and gasket (23) from valve body (10). : 4 mm 2. Remove O-rings (3) (6 used), plates (4) (6 used) and wave springs (5) (6 used) from solenoid valve body (7). 3. Turn over solenoid valve body (7). Remove bolts (14) (14 used) from valve cover (11). Remove valve cover (11) and gasket (22) from valve body (10). : 6 mm 8.
Remove plugs (8) (14 used) from solenoid valve body (7). : 4 mm 9. Put the matching marks onto orifices (1, 15) (6 used for each). Remove orifices (1, 15) (6 used for each) from valve body (10). : 12 mm 4. Remove bolts (13) (2 used) from plate (12). Remove plate (12) from valve cover (11). : 4 mm 10. Remove plugs (9) (6 used) from valve body (10). : 5 mm : 12 mm 5. Remove rods (18) (3 used) from valve cover (11). Remove O-rings (19) (3 used) from rods (18) (3 used). 6. Remove spools (17) (6 used) and pistons (20) (6 used) from valve body (10). Remove springs (16, 21) (6 used for each) from valve body (10) by using a magnet. W3-2-53