BODY (TRAVEL SYSTEM) / Drive Unit Assembly of Transmission Installation of Pump Drive Gear 1. Install ball bearings (56, 59) and charging pump gear (58) and charging pump shaft (57) to torque converter housing (25). 2. Install retaining ring (60) to torque converter housing (25). Installation of Torque Converter 5. Install gear (62) and bearing (63) to shaft (61). 6. Install U-nut (64) to shaft (61). Assembly of Safety Valve 7. Install ball (128), spring seat (131) and spring (127) to torque converter housing (25). 8. Install O-ring (126) to plug (132). Install plug (132) to torque converter housing (25). CAUTION: Torque converter (55) weight: 70 kg (155 lb) 3.
Hoist and install torque converter (55) to torque converter housing (25) by using a plastic hammer. 4. Apply LOCTITE #262 onto bolts (75) (9 used). Install retainer (77) to torque converter housing (25) with bolts (75) (9 used) and washers (76) (9 used). : 36 mm : 175 N m (18 kgf m, 129 lbf ft) : 17 mm : 92 N m (9.5 kgf m, 68 lbf ft) W3-2-67