BODY (TRAVEL SYSTEM) / Drive Unit Installation of Clutch Shaft 9. Temporarily install forward and reverse distributor caps (8, 23) to torque converter housing (25) with bolts (20) (4 used). CAUTION: The 1-speed/2-speed clutch (113) assembly and the 3-speed/4-speed clutch (117) assembly: weight: 55 kg (125 lb) for each 12. Hoist and install 1-speed/2-speed clutch (113) and 3-speed/4-speed clutch (117) to transmission case (50). 13. Install idler shaft (74) to transmission case (50). 14. Install spacer (123) to shaft (124) in transmission case (50). 15. Install reverse gear (122) to transmission case (50). Install shaft (124) with ball (120) attached to transmission case (50).
Installation of Torque Converter Housing 16. Adjust the shim of reverse gear (124). Measure step dimension X between transmission case (50) and shaft (124) without the shim. Install shim (125) so that the step is between (X-0.01) and (X-0.1). W4GC-03-02-130 10. Secure transmission case (50) on a workbench with the torque converter housing (25) mounting surface facing upward. CAUTION: The forward clutch (68) assembly and the reverse clutch (116) assembly: weight: 35 kg (80 lb) for each 11. Hoist and install forward clutch (68) and reverse clutch (116) to transmission case (50). 117 113 50 116 68 W4GC-03-02-131 W3-2-69 8, 23 25 20 8, 23