hitachi — Assembly of Drive Unit

BODY (TRAVEL SYSTEM) / Drive Unit 47. Install a handle to flange (95). Adjust the shim between 1-speed/2-speed and 3-speed/4-speed distributor caps (27, 39) and rear case (54) so that the rolling torque within the specified range is applied to output shaft (99). 3-speed/4-speed clutch: 8.0 to 10.0 N m (0.8 to 1.0 kgf m, 5.9 to 7.4 lbf ft) 1-speed/2-speed clutch: 20.0 to 24.0 N m (2.0 to 2.4 kgf m, 14.5 to 17.5 lbf ft) Installation of Speed Shift Distributor Cap 48. Install the adjusted shims to 1-speed/2-speed and 3-speed/4-speed distributor caps (27, 39).

Install 1-speed/2-speed and 3-speed/4-speed distributor caps (27, 39) to transmission case (50) with bolts (36) (8 used) and washers (37) (8 used). : 17 mm : 34 N m (3.5 kgf m, 25 lbf ft) 39 Handle Shim 50 W4GC-03-02-157 Installation of Parking Brake 49. Install D-rings (91, 92) to piston (88). Install piston (88) to piston housing (84) while aligning the matching marks. 50. Install O-ring (93) to piston housing (84). 51. Install springs (87) (24 used) to piston (88). W4GC-03-02-156 W3-2-77