BODY (TRAVEL SYSTEM) / Drive Unit 52. Install cap (85) to piston housing (84) with bolts (17) (2 used). 56. Install piston housing (84) to rear case (54) with socket bolts (18) (6 used) and washers (19) (6 used). : 52 N m (5 kgf m, 38 lbf ft) 53. Install disc hub (89) to low gear (78). Install retaining ring (86) to low gear (78). 54. Install O-rings (80, 83) to brake housing (94). Install brake housing (94) to rear case (54) with socket bolts (2 used). : 14 mm : 8 mm : 91 N m (9.3 kgf m, 67 lbf ft) Installation of Pump Spacer 57. Install pump drive shaft (67) to shaft (61). 58. Install O-ring (134) to pump spacer (6). 59.
Install pump spacer (6) to transmission case (50) with socket bolts (5) (6 used). : 8 mm : 52 N m (5 kgf m, 38 lbf ft) : 10 mm Socket Bolt 94 : 91 N m (9.3 kgf m, 67 lbf ft) 60. Apply LOCTITE #572 onto orifice (140). Install orifice (140) to pump spacer (7). 54 W4GC-03-02-042 55. Install plates (81) (7 used) and discs (82) (6 used) to brake housing (94) alternately. Install end plate (63) to brake housing (94). W3-2-79