BODY (TRAVEL SYSTEM) / Drive Unit Installation of Charging Pump 61. Apply LOCTITE FMD-127 onto the mating surface on charging pump (1). Install charging pump (1) to transmission case (50) with bolts (48) (2 used) and washers (49) (2 used). Installation of Control Valve 66. Install gasket (139) to control valve (10). : 17 mm CAUTION: Control valve (10) weight: 25 kg (60 lb) 67. Install control valve (10) to transmission case (50) with socket bolts (43) (21 used). : 34 N m (3.5 kgf m, 25 lbf ft) 62. Install strainer (51) to transmission case (50). 63. Install suction tube (24) and gasket (32) to transmission case (50) with bolts (31) (4 used). : 9.8 N m (1 kgf m, 7.2 lbf ft) 68.
Apply LOCTITE #572 onto plug (136) in connector (44). Connect plug (136) and install O-ring (137) to connectors (44) (6 used). Connect connector (44) (6 used) to control valve (10). : 6 mm : 34 N m (3.5 kgf m, 25 lbf ft) 64. Connect hose (7) and suction tube (24) to charging pump (1) with split flanges (2) (2 used), washers (133) (8 used) and bolts (4) (8 used). : 17 mm : 9.8 N m (1 kgf m, 7.2 lbf ft) 69. Install gasket (138) to regulator valve (9). 70. Install regulator valve (9) to transmission case (50) with socket bolts (46) (6 used). : 21 mm : 14 mm : 21 N m (2.1 kgf m, 15.5 lbf ft) 65. Connect pipes (11, 22, 26, 33, 40, 41, 42 and 45) to transmission case (50). : 27 mm : 6 mm :
93 N m (9.5 kgf m, 69 lbf ft) : 36 mm : 9.8 N m (1 kgf m, 7.2 lbf ft) Installation of Sensor 71. Apply LOCTITE #572 onto sensor (3). Install sensors (3) (4 used) to transmission case (50). Secure sensor (3) at the position returned to 2 turns after attaching sensor (3) to the gear. : 157 N m (16 kgf m, 116 lbf ft) : 27 mm W3-2-81