hitachi — Removal and Installation of Axle

BODY (TRAVEL SYSTEM) / Axle 4. Connect hose (9) to front axle (11) with clip (10). 5. Connect hose (8) to block (7). W4GB-03-03-103 : 29.5 N m (3 kgf m, 21.5 lbf ft) 6. Install the propeller shaft. (Refer to W3-4.) 7. Install the front tires (2 used). (Refer to W3-1.) : 19 mm 7 8 W4GB-03-03-102 CAUTION: Machine weight: 14500 kg (32000 lb) 8. After completing the work, check the hydraulic oil level. Start the engine and check for any oil leaks. Bleed air from the brake circuit. (Refer to T5-6 in Technical Manual.) Raise the bucket. Set a hydraulic jack on both sides of the front frame. Raise the front frame side. Remove stand (5) and rear wheel stopper (6). 5 6 W4GB-03-03-101 W3-3-5 9 10 11