hitachi — Removal and Installation of Axle

BODY (TRAVEL SYSTEM) / Axle Removal of Rear Axle CAUTION: As the accumulator is installed to the brake hydraulic circuit, depress the brake pedal at least 50 strokes in order to reduce the pressure. 1. Remove the rear tires (2 used). (Refer to W3-1.) 2. Remove the propeller shaft. (Refer to W3-4.) 3. Disconnect hose (9) from block (10). : 19 mm 4. Remove clip (12) from hose (13). Disconnect hose (13) from rear axle (11). W4GB-03-03-109 W4GB-03-03-110 W3-3-7 9 10 9 12 13 11 13