BODY (TRAVEL SYSTEM) / Axle 4. Connect hose (13) to rear axle (11) with clip (12). 5. Connect hose (9) to block (10). 12 13 11 W4GB-03-03-110 : 29.5 N m (3 kgf m, 21.5 lbf ft) 6. Install the propeller shaft. (Refer to W3-4.) 7. Install the rear tires (2 used). (Refer to W3-1.) : 19 mm 9 10 W4GB-03-03-109 CAUTION: Machine weight: 14500 kg (32000 lb) 8. After completing the work, check the oil level. Start the engine and check for any oil leaks. Bleed air from the brake circuit. (Refer to T5-6 in Technical Manual.) Raise the bucket. Set a hydraulic jack on both sides of the rear frame. Raise the rear frame side. Remove stands (6, 7 and 8). 6 8 7 W4GB-03-03-107 W3-3-10