BODY (TRAVEL SYSTEM) / Axle Disassembly of Axle 4. Remove axle tube (2) from differential gear body (5) by using a plastic hammer. 5. Remove the shaft (40) assembly from side gear (35). 6. Remove axle tube (7) and the shaft (40) assembly on the opposite side in the same way. Disassembly of Axle Tube (2) CAUTION: The axle assembly weight: TPD front axle : 760 kg (1700 lb) TPD rear axle : 725 kg (1600 lb) LSD front axle : 765 kg (1700 lb) LSD rear axle : 730 kg (1650 lb) Removal of Axle Tubes (2, 7) 1. Remove drain plug (10) from differential gear body (5). Drain gear oil from differential gear body (5). : 14 mm Gear oil amount: 28 L (7.4 US gal.) 2.
Remove bolts (11) (20 used) and washers (12) (20 used) from axle tube (2). 7. Secure axle tube (2) on a workbench with the differential gear body (5) side of axle tube (2) facing upward. 8. Remove bolt (70) and retainer plate (89) from axle shaft (73). : 24 mm : 36 mm CAUTION: The axle tube (2, 7) assembly weight: Front axle : 235 kg (520 lb) Rear axle : 215 kg (475 lb) 3. Attach a nylon sling onto axle tube (2). Hold axle tube (2). Place axle tube (2) onto a stand in order not to lower axle tube (7) on the opposite side. CAUTION: Planet carrier assembly (68) weight: 40 kg (90 lb) 9. Remove planet carrier assembly (68) from axle shaft (73) by using a pry bar.
W4GB-03-03-004 W3-3-15 Stand Stand