BODY (TRAVEL SYSTEM) / Axle 18. Remove the planet gear (85) assembly and thrust washers (87) (2 used) from planet carrier (91). 19. Remove bearings (86) (2 used) and collar (83) from planet gear (85). 20. Disassemble other planet shafts (84) (2 used) in the same way. 21. Remove retainer plate (89) and shims (67) (6 used) from planet carrier (91). Removal of Brake 22. Remove end plate (21), brake rings (20) (2 used), brake discs (19) (2 used) and brake ring (64) from differential gear body (5). Remove pins (22) (8 used) from differential gear body (5). 23. Remove button bolts (38) (8 used), adapters (37) (8 used) and springs (36) (8 used) from brake piston (25). : 6 mm 24.
Install stopper (B) to prevent the piston from flying off by using the tube mounting surface on differential gear body (5). W4GB-03-03-017 25. Add compressed air through the hydraulic port. Remove brake piston (25) from differential gear body (5). 26. Remove D-rings (23, 24) from brake piston (25). 27. Remove the brake on the opposite side in the same way. W3-3-19 B Hydraul Port Hydraul Port ic