hitachi — Disassembly of Axle

BODY (TRAVEL SYSTEM) / Axle Removal of the Bearing Cage (59) Assembly 28. Remove bolts (17) (28 used) and washers (18) (28 used) from cover (16). Remove cover (16) from differential gear body (5). Disassembly of the Bearing Cage (59) Assembly 32. Secure bearing cage (59) on a workbench with the flange (58) side facing upward. Remove bolt (56) and washer (57) from flange (58). : 17 mm 29. Put the matching marks onto the gear teeth contact condition and the backlash of ring gear (29). 30. Remove bolts (8) (18 used) and washers (9) (18 used) from bearing cage (59). : 24 mm 33. Remove washer (57) and O-ring (54) from flange (58). 34. Remove flange (58) from pinion gear (47).

Remove dust cover (52) from flange (58). 35. Remove pinion gear (47) from bearing cage (59) by using a press. 36. Remove spacers (49, 50) from pinion gear (47). 37. Remove the inner race of bearing (48) from pinion gear (47) by using a separator. : 17 mm 31. Install bolts (8) (2 used) to thread part (C) for the puller of bearing cage (59). Tighten bolts (8) (2 used). Remove the bearing cage (59) assembly. NOTE: Halved shims (61) (8 used) are located between differential gear body (5) and bearing cage (59). W4GB-03-03-020 : 17 mm W4GD-03-03-007 W3-3-21 Separator 48 47 Separator C 8 C