BODY (TRAVEL SYSTEM) / Axle Disassembly of Differential Case (only Axle with TPD attached) 47. Remove bolts (27) (20 used) and washers (28) (20 used) from flange half case (30). Remove ring gear (29) from flange half case (30). 51. Remove the inner race of bearing (26) from plane half case (33) and flange half case (30) by using a bearing puller. : 24 mm 48. Turn over the differential case. Remove bolts (31) (12 used) and washers (32) (12 used) from plane half case (33). Bearing Puller : 17 mm 49. Put the matching marks onto plane half case (33). Remove plane half case (33) from flange half case (30). 50.
Remove side gears (35) (2 used), spider (39), pinion gears (46) (4 used), thrust washers (34) (2 used) for the guide gear and pinion gear thrust washers (45) (4 used) for the guide gear from flange half case (30) and plane half case (33). 26 33 W4GB-03-03-027 W3-3-25