BODY (TRAVEL SYSTEM) / Axle Disassembly of Differential Case (only Axle with LSD attached) 52. Remove bolts (27) (20 used) and washers (28) (20 used) from case A (74). Remove ring gear (29) from case A (74). 56. Remove the inner races of bearings (26) (2 used) from case B (75) and case A (74) by using a bearing puller. : 24 mm 53. Install pulling-out bolts (M12, Pitch 1.25 mm) (2 used) to thread part (E) for the puller of case A (74). Tighten bolts (M12, Pitch 1.25 mm) (2 used). Remove case A (74) from case B (75). Bearing Puller : 17 mm 26 74 75 E E 75 W4GB-03-03-029 54. Remove plate (79), plates (77) (2 used), discs (78) (2 used), pressure ring (76) and side gear (80) from case B (75). 55.
Remove spider (81), pinion gears (82) (4 used), side gear (80), pressure ring (76), discs (78) (2 used), plates (77) (2 used) and plate (79) from case B (75). W4GB-03-03-032 W3-3-27