hitachi — Assembly of Axle

BODY (TRAVEL SYSTEM) / Axle 28. Install dust cover (52) to flange (58). Install flange (58) to pinion gear (47). Turn flange (58) and reduce deformation of the lip part in oil seal (53). 29. Measure step (x) between flange (58) and the end of pinion gear (47). Adjust shim (55) so that this step (x) is within 0.05 to 0.1 mm (0.002 to 0.004 in). Installation of Differential Case 32. Install the outer race of bearing (26) to bearing retainers (41) (2 used). 33. Install adjusting nuts (62) (2 used) to bearing retainers (41) (2 used). CAUTION: The differential assembly weight: TPD: 65 kg (145 lb) LSD: 65 kg (145 lb) 34. Hoist and install the differential case to differential gear body (5). 35.

Apply LOCTITE #262 onto bolts (42) (20 used). Install bearing retainers (41) (2 used) to differential gear body (5) with bolts (42) (20 used) and washers (43) (20 used). 47 58 X 52 W4GB-03-03-081 30. Install O-ring (54) to pinion gear (47). 31. Apply LOCTITE #262 onto bolt (56). Install washer (57) to pinion gear (47) with bolt (56) by using a nut runner. Check that pinion gear (47) rotates smoothly. : 98 N m (10 kgf m, 72 lbf ft) : 17 mm : 225 N m (23 kgf m, 166 lbf ft) : 24 mm W3-3-39