BODY (TRAVEL SYSTEM) / Axle 56. Secure axle tube (2) on a workbench with the wheel side facing upward. Install the outer race and the inner race of bearing (71) to axle tube (2). 57. Apply grease onto the lip part in oil seal (72). Install oil seal (72) to axle tube (2). Preload Adjustment of Axle Shaft (73) Bearing (69) (Shim Adjustment) CAUTION: Planet carrier (85) weight: 25 kg (60 lb) 61. Install planet carrier (91) without installing gear the to axle shaft (73) in order to adjust the preload. CAUTION: Axle tube (2) weight: Front axle : 125 kg (280 lb) Rear axle : 105 kg (235 lb) 58. Turn over axle tube (2). Hoist axle tube (2) with the differential gear body (5) side facing upward.
Install axle tube (2) to raised axle shaft (73). 59. Cover axle shaft (73) with special tool (H). Install oil seal (72) and bearing (71) at the wheel side to axle shaft (73). W4GB-03-03-066 62. Install retainer plate (89) to planet carrier (91). Install the inner race of bearing (69) to axle shaft (73) with bolt (70). At this time, install axle tube (2) by turning. 2 H 73 : 49 N m (5 kgf m, 36 lbf ft) 63. Remove bolt (70) and retainer plate (89) from axle shaft (73). Measure step (Y) between axle shaft (73) and planet carrier (91). Select shim (67) which is 0.03 to 0.10 mm (0.001 to 0.004 in) thicker than step (Y). : 36 mm W4GB-03-03-065 60.
Install the outer race of bearing (69) to axle tube (2). : 36 mm (Y) 73 91 W4GB-03-03-067 W3-3-47 91