hitachi — Assembly of Axle

BODY (TRAVEL SYSTEM) / Axle IMPORTANT: Apply LOCTITE onto the inside of the bolt (17) hole line in order not to intermit on the bead. 76. Apply LOCTITE FMD-127 onto the cover (16) mounting surface on differential gear body (5). 77. Apply LOCTITE #572 onto drain plug (10). Install drain plug (10) to differential gear body (5). Add gear oil to differential gear body (5). CAUTION: Planet carrier assembly (68) weight: 40 kg (90 lb) 72. Install selected shim (67) and planet carrier assembly (68) to axle shaft (73). 73. Apply LOCTITE #262 onto bolt (70). Install retainer plate (89) and planet carrier assembly (68) to axle shaft (73) with bolt (70). Install the other side in the same way. :

70 N m (7 kgf m, 52 lbf ft) Gear oil amount: 28 L (7.4 US gal.) 78. Install cover (16) to differential gear body (5) with bolts (17) (28 used) and washers (18) (28 used). : 14 mm : 1090 N m (111 kgf m, 810 lbf ft) Installation of Axle Tube (2) IMPORTANT: Apply LOCTITE onto the inside of the bolt (11) hole line in order not to intermit on the bead. Bead width is 2 to 3 mm (0.079 to 0.12 in). 74. Apply LOCTITE FMD-127 onto the mating surface on differential gear body (5) for axle tube (2). : 36 mm : 17 mm : 98 N m (10 kgf m, 72 lbf ft) CAUTION: Axle tube (2, 7) assembly weight: Front axle : 235 kg (520 lb) Rear axle : 215 kg (475 lb) 75. Apply LOCTITE #262 onto bolt (11).

Hoist the axle tube (2) assembly. Install the axle tube (2) assembly to differential gear body (5) with bolts (11) (20 used) and washers (12) (20 used). Install the axle tube (7) assembly on the opposite side in the same way. : 24 mm : 225 N m (23 kgf m, 166 lbf ft) W3-3-51