BODY (TRAVEL SYSTEM) / Brake Valve 23. Apply grease onto the inner surface of roller (37) and the outer surface of pin (35). Install roller (37), collars (36) (2 used), pin (35), L pin (34), washer (40) and pin (41) to pedal (38) at the right side. 24. Apply grease onto the inner surface of bushings (51) (2 used) and the outer surface of shaft (53). Install bushings (51) (2 used) to mounting plate (48). Install pedal (38) at the right side, collar (52) and shaft (53) to mounting plate (48) with bolt (42), washer (45) and nut (46). : 14 mm : 29.4 to 34.3 N m (3 to 3.5 kgf m, 21.5 to 25 lbf ft) 25. Install cover (39) to pedal (38) at the right side. 26.
Install bolt (50) and nut (49) to mounting plate (48). While operating pedal (38) at the right side to full stroke, adjust bolt (50) and tighten nut (49) so that the clearance between bolt (50) and roller (37) is 1.7 to 2.0 mm (0.067 to 0.079 in) or less. : 44.1 to 58.8 N m (4.5 to 6.0 kgf m, 32.5 to 43 lbf ft) : 19 mm W3-5-19