BODY (TRAVEL SYSTEM) / Charging Block REMOVAL AND INSTALLATION OF CHARGING BLOCK CAUTION: Before doing any work, stop the engine and depress/release the brake pedal about 80 times in order to release the brake pressure. Move the front attachment control lever in all directions several times in order to release the pilot pressure. Turn the steering wheel to the right and the left several times in order to release the pressure in the circuit. Removal 1. Remove sems bolts (3) (5 used) from covers (2, 4). Remove covers (2, 4) from floor plate (1). : 14 mm 2. Disconnect hoses (6, 7, 11, 12, 14, 15, 18, 19, 20, 21) and the connecters of pressure sensors (9, 17) from charging block (10). :
19 mm, 22 mm, 27 mm W4GB-03-06-011 4 CAUTION: The charging block (10) assembly weight: 30 kg (70 lb) 3. Remove bolts (5, 8, 13 and 16) from charging block (10). Remove charging block (10) from floor plate (1). 1 9 8 7 6 5 10 : 14 mm 4. Remove pressure sensors (9, 17) from charging block (10). 21 20 11 : 24 mm, 27 mm 12 19 18 W4GB-03-06-012 W3-6-1 1 Side 2 3 2 13 17 16 15 14