hitachi — Disassembly of Charging Block

BODY (TRAVEL SYSTEM) / Charging Block Disassembly of Charging Block 1. Remove plug (9), O-ring (7), spring (10), plunger (11) and sleeve (12) from body (16). 6. Remove plug (57), O-ring (56), shims (54, 55), spring (53) and poppet (52) from body (16). : 6 mm 2. Remove plugs (13) (9 used), O-rings (14) (9 used) and orifice (58) from body (16). : 30 mm 7. Remove socket bolts (23) (2 used) from body (16). Remove solenoid (25), O-ring (26), sleeve (27) and O-rings (28, 29, 30) from body (16). Remove spool (31) and spring (32) from body (16). : 5 mm 3. Remove plugs (8) (4 used), O-rings (7) (4 used), springs (6) (4 used) and plungers (5) (4 used) from body (16). : 4 mm 8.

Remove nut (49), O-ring (50) and spool (51) from body (16). : 6 mm 4. Remove plugs (34) (3 used), O-rings (33) (3 used), spring (36) and plunger (35) from body (16). : 17 mm 9. Remove socket bolts (23) (2 used) from body (16). Remove solenoid (24), O-ring (22) and the sleeve (21) assembly from body (16). Remove spool (20) from sleeve (21). : 8 mm 5. Remove the body (41) assembly from body (16). : 4 mm : 32 mm NOTE: As stopper (17) is installed in sleeve (21), spring (18) and washer (19) cannot be disassembled. 10. Remove plugs (1) (5 used), (3) (9 used), O-rings (2) (5 used), (4) (9 used) and filters (15) (2 used) from body (16). NOTE:

As the set pressure changes, do not disassemble the body (41) assembly unless necessary. : 1/8 inch, 6 mm W3-6-7