BODY (TRAVEL SYSTEM) / Steering Pilot Valve 7. Remove seal (5) and dust seal (1) from bushing (3). IMPORTANT: Wear a pair of protective glasses as center spring (11) and flat spring (12) may fly out. 11. Push spool (13) in sleeve (9) forward. Remove center springs (11) (4 used) and flat springs (12) (2 used) from spool (13). NOTE: Do not damage bushing (3) when removing seal (5). 8. Remove bearing races (6) (2 used) and thrust needle (7) from spool (13). 9. Remove spool (13) and the sleeve (9) assembly from housing (8). NOTE: Remove the sleeve (9) assembly from housing (8) by rotating in order not to get sleeve (9) caught in housing (8). 10. Remove pin (10) from the sleeve (9) assembly.
NOTE: Put the matching marks onto the sleeve (9) assembly by using an oil-based pen before removing pin (10). 13 10 9 W4GB-03-07-002 12. Remove spool (13) from sleeve (9) by rotating. 13. Remove O-ring (4) from housing (8). W202-02-14-021 Matching Mark W3-7-7