hitachi — Assembly of Steering Pilot Valve

BODY (TRAVEL SYSTEM) / Steering Pilot Valve 5. Install O-rings (4), bearing races (6) (2 used) and thrust needle (7) to housing (8). CAUTION: Wear a pair of protective glasses as retaining ring (2) may fly out from housing (8). 9. Secure housing (8) in a vise lightly. 10. Install O-ring (14) to housing (8). Install ball (22) and screw (23) to housing (8) as illustrated below. Place plate (15) to housing (8). NOTE: Do not drop or lose ball (22). 23 22 W202-02-14-023 6. Install dust seal (1) and seal (5) to bushing (3). 7. Insert bushing (3) into spool (13) by tapping lightly by using a plastic hammer. 8 NOTE: Check that bushing (3) comes in contact with bearing race (6) horizontally. 8.

Install retaining ring (2) to housing (8). NOTE: After installing retaining ring (2), extend the inner diameter of retaining ring (2) by using a screwdriver in order to install retaining ring (2) correctly to the groove on housing (8). W487-03-08-004 W212-02-14-002 W3-7-11 7 6 4 8 Screwdriver 1 5 6 2 8 4 3