BODY (TRAVEL SYSTEM) / Steering Valve REMOVAL AND INSTALLATION OF STEERING VALVE CAUTION: Bleed air from the hydraulic oil tank before doing any work. (Refer to BLEED AIR FROM HYDRAULIC OIL TANK on W1-4-1.) CAUTION: In order to release the hydraulic pressure in the steering hydraulic circuit, stop the engine and turn the steering wheel to the right and the left several times. The steering wheel turns heavily when the hydraulic pressure is released. Preparation 1. Park the machine on a level and solid surface. Lower the bucket onto the ground horizontally. 2. Stop the engine and release the hydraulic pressure. 3.
Secure articulation lock bar (2) in the hole on front frame (3) with set pin (1) and β (beta) pin (4). 1 2 Hole 3 4 M4GB-01-135 Machine Front 2 M4GB-01-136 W3-8-1