hitachi — Assembly of Steering Valve

BODY (TRAVEL SYSTEM) / Steering Valve Assembly of Steering Valve 1. Install backup rings (13) (2 used) and O-rings (14) (2 used) to cap screws (12) (2 used). 2. Secure spool (19) by using wooden pieces (Refer to W3-8-5.) in a vise. Install poppets (16) (2 used), springs (15) (2 used) and cap screws (12) (2 used) to spool (19). 7. Install relief valves (1) (2 used) to valve housing (17). : 78 to 88 N m (8 to 9 kgf m, 57.5 to 65 lbf ft) : 32 mm : 39.2 to 41.2 N m (4.0 to 4.2 kgf m, 29 to 30.5 lbf ft) 3. Insert the spool (19) assembly into valve housing (17) by rotating. 4. Install sleeve assembly (5) to cap assembly (7). 5.

Install spring seats (11) (2 used), springs (10) (2 used) and O-rings (4, 8, 9) (2 used for each) to cap (18) and cap assembly (7). Install cap (18) and cap assembly (7) to valve housing (17) with socket bolts (6) (4 used). : 17 mm : 6 mm : 39 to 44 N m (4.0 to 4.5 kgf m, 28.5 to 32.5 lbf ft) 6. Install O-ring (3) to plug (2). Install plug (2) to valve housing (17). : 206 to 225 N m (21 to 23 kgf m, 152 to 166 lbf ft) : 36 mm W3-8-7