BODY (TRAVEL SYSTEM) / Steering Cylinder Installation 5. Install pins (14, 25) to rear frame (18) with washers (15, 16, 23, 24) and bolts (17, 22). CAUTION: Steering cylinders (11, 20) weight: 24 kg (55 lb) 1. Attach a nylon sling onto steering cylinders (11, 20). Hold steering cylinders (11, 20). 2. Align the pin (4, 8) holes on steering cylinders (11, 20) and front frame (9). Install shims (10, 19) (2 used for each) to the upper surface at the bottom side of steering cylinders (11, 20). 3. Install pins (4, 8) to front frame (9) with washers (2, 3, 6, 7) and bolts (1, 5). : 17 mm : 50 N m (5 kgf m, 37 lbf ft) 6. Connect the lubrication pipes (2 used) to pins (4, 8). : 14 mm :
24.5 N m (2.5 kgf m, 18 lbf ft) 7. Connect hoses (26 to 31) to steering cylinders (11, 20). : 27 mm : 93 N m (9.5 kgf m, 69 lbf ft) : 22 mm : 50 N m (5 kgf m, 37 lbf ft) 4. Align the pin (14, 15) holes on rear frame (18) and the rod side of steering cylinders (11, 20). Install shims (12, 21) (2 used for each) to the upper surface at the rod side of steering cylinders (11, 20). : 17 mm : 69 N m (7 kgf m, 51 lbf ft) 8. Install cover (33) to front frame (9) with sems bolts (32) (4 used). : 14 mm : 50 N m (5 kgf m, 37 lbf ft) 9 32 33 W4GB-02-05-022 W 3-9-5