hitachi — Disassembly of Steering Cylinder

BODY (TRAVEL SYSTEM) / Steering Cylinder Disassembly of Steering Cylinder 3. Loosen rod cover (15) by using a hooked spanner. Remove the piston rod (10) assembly from cylinder tube (8). Rod cover (15) diameter: 84 mm (3.3 in) CAUTION: Steering cylinder weight: 24 kg (55 lb) 1. Hoist and secure the cylinder on a workbench horizontally. Drain hydraulic oil from the cylinder. Hooked Spanner W102-04-02-027 IMPORTANT: The lock washer forms an integral part with cylinder tube (8). Do not damage cylinder tube (8) and rod cover (15) when extending the lock washer. 2. Pull out piston rod (10) about 50 mm (1.97 in) from cylinder tube (8). Install a protective cover to piston rod (10).

Extend the lock washer in rod cover (15) by using a chisel and a hammer. W506-04-02-004 15 10 8 Lock Washer 10 15 W506-04-02-003 W3-9-7 8