BODY (TRAVEL SYSTEM) / Steering Cylinder 5. Install U-packing (13) and buffer seal (14) to rod cover (15). 8. Install the special tool to piston (3). Install the back ring of packing (2) to piston (3). 13 14 NOTE: As for the special tool, refer to W3-9-21. Special Tool W4GB-04-02-016 3 Mounting Direction Detail of Backup Ring for Buffer Seal W4GB-04-02-018 W4GB-04-02-017 6. Install O-ring (18) and backup ring (19) to rod cover (15). 7. Install lock washer (16) and O-ring (17) to rod cover (15). CAUTION: Warm up the seal ring of packing (2) by using oil heated by an electric heater. Avoid direct heating by using fire. 9. Warm up the seal ring of packing (2) to 150 to 180 °C (302 to 356 °F).
Install the seal ring of packing (2) to the seal groove on piston (3). W3-9-15 Seal Ring Packing (2 of ) Back Ring Packing (2 of ) Part R Part R