hitachi — Assembly of Steering Cylinder

BODY (TRAVEL SYSTEM) / Steering Cylinder 10. Adjust the seal ring of extended packing (2) by using the special tool. 13. Secure piston rod (10) on a workbench horizontally. 14. Install wear ring (4) and dust rings (1) (2 used) to piston (3). Apply hydraulic oil onto piston (3). NOTE: As for the special tool, refer to W3-9-21. Special Tool NOTE: Do not drop wear ring (4) and dust rings (1) (2 used). 1 1 4 W4GB-04-02-019 11. Install O-ring (23) and backup rings (22) (2 used) to piston (3). W4GB-04-02-021 15. Apply hydraulic oil onto the special tool and the piston rod (10) surface. Install rod cover (15) to piston rod (10) by using the special tool. W4GB-04-02-021 12.

Install the backup ring of packing (2) to both sides of the seal ring of packing (2). Backup Ring NOTE: As for the special tool, refer to W3-9-23. Back Ring Seal Ring Direction of Piston (3) Seal Component Parts W4GB-04-02-020 W3-9-17 22 23 3 R R