hitachi — Removal and Installation of Front Attachment

FRONT ATTACHMENT / Front Attachment REMOVAL AND INSTALLATION OF FRONT ATTACHMENT Preparation 1. Park the machine on a solid and level surface. Lower the bucket onto the ground. 2. Place the blocks in front of and behind the axle in order to secure the machine. • Disconnect remote pipe (1) in the grease fitting from the front attachment. • Remove lift arm proximity switch (2). • Remove angle sensor (3) from the machine with lift arm auto leveler attached. • Remove lift arm proximity switch (2) and disconnect the harness of angle sensor (3). W4GB-03-04-001 W4GB-04-01-020 2 W4GB-04-01-021 W4GB-04-01-019 W4-1-1 1 3