FRONT ATTACHMENT / Front Attachment Removal 4. Move O-rings (32) (4 used) of the bucket (41) and lift arm (14) connection part to the bucket (41) side. CAUTION: Metal fragments may fly off when a hammer is used. Wear necessary protection, such as goggles, hard hats, etc in order to prevent personal injury. 1. Operate the bucket control lever and the lift arm control lever. Release the remaining pressure in bucket cylinder (1) and lift arm cylinder (20). 32 41 14 W183-04-01-002 5. Remove bolts (35) (2 used), washers (33) (2 used) and spring washers (34) (2 used) from bucket (41). Remove pins (36) (2 used) from bucket (41). Remove spacers (31) (4 used) from lift arm (14). : 17 mm CAUTION:
Bucket (41) weight (3 m 3 bolt-on cutting edge): 1380 kg (3050 lb) 6. Attach a wire rope onto the spill guard of bucket (41). Hold bucket (41). 2. Move O-rings (30) (2 used) of the bucket (41) and bucket link (28) connection part to the bucket (41) side. 30 41 41 28 W183-04-01-002 3. Remove bolt (37), washer (39) and spring washer (38) from bucket (41). Remove pin (40) from bucket (41). Remove spacers (29) (2 used) from bucket link (28). : 17 mm W4GB-04-01-004 W4-1-3 14 1 41 40 36 28 20 W4GB-04-01-00