hitachi — Removal and Installation of Front Attachment

FRONT ATTACHMENT / Front Attachment 18. Remove bolts (6) (2 used), washers (4) (2 used) and spring washers (5) (2 used) from the front frame. Remove pins (3) (2 used) from lift arm (14). Remove spacers (15) (4 used) from lift arm (14). CAUTION: Lift arm (14) weight: 1150 kg (2550 lb) 14. Start and stop the engine. Install pin (19) to the pin (19) hole on lift arm (14). Attach a nylon sling onto pin (19). Hold lift arm (14). : 24 mm 19. Attach a nylon sling onto lift arm (14). Hold lift arm (14). Remove lift arm (14) from the front frame. 19 14 3 24 Stand 20 W4GB-04-01-007 15. Raise lift arm (14) until lift arm cylinder (20) is located at horizontal position. 16.

Place a stand under lift arm cylinders (20) (2 used). 17. Remove bolts (21) (2 used), washers (23) (2 used) and spring washers (22) (2 used) from lift arm cylinder (20). Remove pins (24) (2 used) from lift arm (14). Remove spacers (25) (4 used) from lift arm (14). : 24 mm W4-1-7 Fron Fra t me