FRONT ATTACHMENT / Front Attachment 7. Hoist bucket cylinder (1). Align the pin (10) holes on bucket cylinder (1) and bell crank (9). CAUTION: Bell crank (9) weight: 240 kg (530 lb) Bucket link (28) weight: 55 kg (125 lb) 5. Hoist pin (10) in bell crank (9). Align the pin (19) holes on bell crank (9) and lift arm (14). 1 10 Hole for Pin (10) 9 9 14 19 28 W4GB-04-01-005 8. Install spacers (8) (2 used) to the pin (10) hole on bucket cylinder (1). Install pin (10) to bell crank (9) with spring washer (12), washer (11) and bolt (13). W4GB-04-01-006 6. Install spacers (27) (2 used) to the pin (19) hole on bell crank (9).
Install pin (19) to lift arm (14) with spring washer (17), washer (18) and bolt (16). : 24 mm : 87 N m (8.9 kgf m, 64 lbf ft) : 87 N m (8.9 kgf m, 64 lbf ft) : 24 mm W4-1-11