FRONT ATTACHMENT / Front Attachment 11. Move O-rings (32) (4 used) which were moved to the bucket (41) side to the bucket (41) and lift arm (14) connection part. CAUTION: Bucket (41) weight (3 m 3 bolt-on cutting edge): 1380 kg (3050 lb) 9. Hoist bucket (41). Align the pin (36) holes on bucket (41) and lift arm (14). 32 41 14 14 41 W183-04-01-004 12. Install spacers (29) (2 used) to the pin (40) hole on bucket link (28). Install pin (40) to bucket (41) with spring washer (38), washer (39) and bolt (37). : 17 mm W4GB-04-01-004 : 91 N m (9.3 kgf m, 67 lbf ft) 13. Move O-rings (30) (2 used) which were moved to the bucket (41) side to the bucket (41) and bucket link (28) connection part.
30 28 41 10. Install spacers (31) (4 used) to the pin (36) holes (2 used) on lift arm (14). Install pins (36) (2 used) to bucket (41) with spring washers (34) (2 used), washers (33) (2 used) and bolts (35) (2 used). W183-04-01-004 14. Apply grease through the grease fitting. Connect the remote pipe, the harness and install the switch to the grease fitting. : 17 mm : 91 N m (9.3 kgf m, 67 lbf ft) W4-1-13 40 36