FRONT ATTACHMENT / Cylinder Removal of Lift Cylinder Installation of Lift Cylinder CAUTION: Lift cylinder (7) weight: 140 kg (310 lb) 1. Attach a nylon sling onto lift cylinders (7) (2 used). Hold lift cylinders (7) (2 used). 2. Remove bolts (14) (16 used) from split flanges (13) (8 used). Remove split flanges (13) (8 used) from lift cylinders (7) (2 used). Disconnect hoses (15, 16) (2 used for each) from lift cylinders (7) (2 used). Cap the open ends. CAUTION: Lift cylinder (7) weight: 140 kg (310 lb) 1. Attach a nylon sling onto lift cylinders (7) (2 used). Hold lift cylinders (7) (2 used). 2.
Align the pin (9) (2 used) holes on the bottom side and on the front frame (17) side of lift cylinders (7) (2 used). Install spacers (8) (4 used) to the bottom side of lift cylinders (7) (2 used). 3. Install pins (9) (2 used) to front frame (17) with washers (10) (2 used), spring washers (11) (2 used) and bolts (12) (2 used). : 14 mm 3. Remove bolts (6) (2 used), spring washers (5) (2 used) and washers (4) (2 used) from pins (3) (2 used). : 24 mm : 87 N m (8.9 kgf m, 64 lbf ft) 4. Connect hoses (15, 16) (2 used for each) to lift cylinders (7) (2 used) with split flanges (13) (8 used) and bolts (14) (16 used). : 24 mm 4. Remove pins (3) (2 used) from lift cylinders (7) (2 used). 5.
Remove bolts (12) (2 used), spring washers (11) (2 used) and washers (10) (2 used) from pins (9) (2 used). : 14 mm : 52 N m (5.3 kgf m, 38 lbf ft) 5. Start the engine. Extend the piston rod of lift cylinders (7) (2 used). Align the pin (3) holes on lift cylinders (7) (2 used) and lift arm (1). Install spacers (2) (4 used) to the rod side of lift cylinders (7) (2 used). 6. Install pins (3) (2 used) to lift cylinders (7) (2 used) with washers (4) (2 used), spring washers (5) (2 used) and bolts (6) (2 used). : 24 mm 6. Remove pins (9) (2 used) from front frame (17). 7. Remove lift cylinders (7) (2 used) and spacers (2, 8) (4 used for each) from lift arm (1) and front frame (17). : 24 mm :
87 N m (8.9 kgf m, 64 lbf ft) W4-2-3