hitachi — Removal and Installation of Cylinder

FRONT ATTACHMENT / Cylinder Removal of Bucket Cylinder Installation of Bucket Cylinder CAUTION: Bucket cylinder (13) weight: 140 kg (310 lb) 1. Attach a nylon sling onto bucket cylinder (13). Hold bucket cylinder (13). 2. Remove bolts (1, 5) (8 used) from split flanges (3, 4) (2 used for each). Remove split flanges (3, 4) (2 used for each) from bucket cylinder (13). Disconnect hoses (2, 6) from bucket cylinder (13). Cap the open ends. CAUTION: Bucket cylinder (13) weight: 140 kg (310 lb) 1. Attach a nylon sling onto bucket cylinder (13). Hold bucket cylinder (13). 2. Align the pin (15) holes on bucket cylinder (13) and front frame (19). 3.

Align the pin (15) holes on the bottom side and the front frame (19) side of bucket cylinder (13). Install spacers (14) (2 used) to the bottom side of bucket cylinder (13). 4. Install pin (15) to front frame (19) with washer (16), spring washer (17) and bolt (18). : 14 mm 3. Remove bolt (11), spring washer (10) and washer (9) from pin (8). : 24 mm 4. Remove pin (8) from bell crank (7). 5. Remove bolt (18), spring washer (17) and washer (16) from pin (15). : 87 N m (8.9 kgf m, 64 lbf ft) 5. Connect hoses (2, 6) to bucket cylinder (13) with split flanges (3, 4) (2 used for each) and bolts (1, 5) (4 used for each). : 24 mm : 24 mm 6. Remove pin (15) from front frame (19). 7.

Remove bucket cylinder (13) and spacers (12, 14) (2 used for each) from bell crank (7) and front frame (19). : 14 mm : 52 N m (5.3 kgf m, 38 lbf ft) 6. Start the engine. Extend the piston rod of bucket cylinder (13). Align the pin (8) holes on bucket cylinder (13) and bell crank (7). Install spacers (12) (2 used) to the rod side of bucket cylinder (13). 7. Install pin (8) to bell crank (7) with washer (9), spring washer (10) and bolt (11). : 87 N m (8.9 kgf m, 64 lbf ft) : 24 mm W4-2-5